- variableTemperature variable
C++ Type:std::vector<VariableName>
Controllable:No
Description:Temperature variable
GapConductanceConstant
Description
The GapConductanceConstant material provides a user-specified, constant gap conductance that is used in thermal contact enforcement. This material model is typically not directly specified by the user, but is created using the ThermalContactAction, the details of which are documented in the ThermalContact system documentation page.
Input Parameters
- appended_property_nameName appended to material properties to make them unique
C++ Type:std::string
Controllable:No
Description:Name appended to material properties to make them unique
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- cylinder_axis_point_1Start point for line defining cylindrical axis
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:Start point for line defining cylindrical axis
- cylinder_axis_point_2End point for line defining cylindrical axis
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:End point for line defining cylindrical axis
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- emissivity_primary1The emissivity of the primary surface
Default:1
C++ Type:double
Controllable:No
Description:The emissivity of the primary surface
- emissivity_secondary1The emissivity of the secondary surface
Default:1
C++ Type:double
Controllable:No
Description:The emissivity of the secondary surface
- gap_conductivity1The thermal conductivity of the gap material
Default:1
C++ Type:double
Controllable:No
Description:The thermal conductivity of the gap material
- gap_conductivity_functionThermal conductivity of the gap material as a function. Multiplied by gap_conductivity.
C++ Type:FunctionName
Controllable:No
Description:Thermal conductivity of the gap material as a function. Multiplied by gap_conductivity.
- gap_conductivity_function_variableVariable to be used in the gap_conductivity_function in place of time
C++ Type:std::vector<VariableName>
Controllable:No
Description:Variable to be used in the gap_conductivity_function in place of time
- gap_distanceDistance across the gap
C++ Type:std::vector<VariableName>
Controllable:No
Description:Distance across the gap
- gap_geometry_typeGap calculation type.
C++ Type:MooseEnum
Controllable:No
Description:Gap calculation type.
- gap_tempTemperature on the other side of the gap
C++ Type:std::vector<VariableName>
Controllable:No
Description:Temperature on the other side of the gap
- max_gap1e+06A maximum gap (denominator) size
Default:1e+06
C++ Type:double
Controllable:No
Description:A maximum gap (denominator) size
- min_gap1e-06A minimum gap (denominator) size
Default:1e-06
C++ Type:double
Controllable:No
Description:A minimum gap (denominator) size
- min_gap_order0Order of the Taylor expansion below min_gap
Default:0
C++ Type:unsigned int
Controllable:No
Description:Order of the Taylor expansion below min_gap
- orderFIRSTThe finite element order
Default:FIRST
C++ Type:MooseEnum
Controllable:No
Description:The finite element order
- paired_boundaryThe boundary to be penetrated
C++ Type:BoundaryName
Controllable:No
Description:The boundary to be penetrated
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- quadratureFalseWhether or not to do quadrature point based gap heat transfer. If this is true then gap_distance and gap_temp should NOT be provided (and will be ignored); however, paired_boundary and variable are then required.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to do quadrature point based gap heat transfer. If this is true then gap_distance and gap_temp should NOT be provided (and will be ignored); however, paired_boundary and variable are then required.
- sphere_originOrigin for sphere geometry
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:Origin for sphere geometry
- stefan_boltzmann5.669e-08The Stefan-Boltzmann constant
Default:5.669e-08
C++ Type:double
Controllable:No
Description:The Stefan-Boltzmann constant
- warningsFalseWhether to output warning messages concerning nodes not being found
Default:False
C++ Type:bool
Controllable:No
Description:Whether to output warning messages concerning nodes not being found
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshTrueWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:True
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object