- base_nameOptional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Optional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- flow_rate_user_objectsList of User object names that computes flow rate and derivatives
C++ Type:std::vector<UserObjectName>
Unit:(no unit assumed)
Controllable:No
Description:List of User object names that computes flow rate and derivatives
- internal_var_rate_user_objectsList of User object names that computes internal variable rates and derivatives
C++ Type:std::vector<UserObjectName>
Unit:(no unit assumed)
Controllable:No
Description:List of User object names that computes internal variable rates and derivatives
- internal_var_user_objectsList of User object names that integrates internal variables and computes derivatives
C++ Type:std::vector<UserObjectName>
Unit:(no unit assumed)
Controllable:No
Description:List of User object names that integrates internal variables and computes derivatives
- max_substep_iteration1Maximum number of substep iteration
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Maximum number of substep iteration
- maxiters50Maximum iteration for flow rate update
Default:50
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Maximum iteration for flow rate update
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- resid_abs_tol1e-10Absolute Tolerance for flow rate residual equation
Default:1e-10
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Absolute Tolerance for flow rate residual equation
- resid_rel_tol1e-06Relative Tolerance for flow rate residual equation
Default:1e-06
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Relative Tolerance for flow rate residual equation
- strength_user_objectsList of User object names that computes strength variables and derivatives
C++ Type:std::vector<UserObjectName>
Unit:(no unit assumed)
Controllable:No
Description:List of User object names that computes strength variables and derivatives
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
FiniteStrainHyperElasticViscoPlastic
buildconstruction:Undocumented Class
The FiniteStrainHyperElasticViscoPlastic has not been documented. The content listed below should be used as a starting point for documenting the class, which includes the typical automatic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.
Material class for hyper-elastic viscoplatic flow: Can handle multiple flow models defined by flowratemodel type user objects
Overview
Example Input File Syntax
Input Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object