FVBoundedValueConstraint

This object implements the residuals that enforce the constraint

or

using a Lagrange multiplier approach. E.g. this object enforces the constraint that the value of in the domain has to be above or below a certain value.

warningwarning

The contribution to the diagonal of the system of this kernel is null, which introduces a saddle point. Make sure to use a NONZERO shift in your preconditioner.

Example input syntax

In this example, the value of the variable v is forced to be positive using a FVBoundedValueConstraint. This accelerates the convergence to the solution, as the initial condition is negative and the solution is everywhere positive.

[Variables]
  [v]
    type = MooseVariableFVReal
  []
  [lambda]
    type = MooseVariableScalar
  []
[]

[FVKernels]
  [diff]
    type = FVDiffusion
    variable = v
    coeff = coeff
  []
  [average]
    type = FVPointValueConstraint
    variable = v
    phi0 = 13
    lambda = lambda
    point = '0.3 0 0'
  []
[]
(moose/test/tests/fvkernels/constraints/point_value.i)

Input Parameters

  • bound_typeWhether a minimum or a maximum bound

    C++ Type:MooseEnum

    Options:lower_than, higher_than

    Controllable:No

    Description:Whether a minimum or a maximum bound

  • lambdaLagrange multiplier variable

    C++ Type:std::vector<VariableName>

    Controllable:No

    Description:Lagrange multiplier variable

  • variableThe name of the variable that this residual object operates on

    C++ Type:NonlinearVariableName

    Controllable:No

    Description:The name of the variable that this residual object operates on

Required Parameters

  • blockThe list of blocks (ids or names) that this object will be applied

    C++ Type:std::vector<SubdomainName>

    Controllable:No

    Description:The list of blocks (ids or names) that this object will be applied

  • phi00The min or max bound

    Default:0

    C++ Type:PostprocessorName

    Controllable:No

    Description:The min or max bound

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Optional Parameters

  • absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution

  • extra_matrix_tagsThe extra tags for the matrices this Kernel should fill

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The extra tags for the matrices this Kernel should fill

  • extra_vector_tagsThe extra tags for the vectors this Kernel should fill

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The extra tags for the vectors this Kernel should fill

  • matrix_tagssystemThe tag for the matrices this Kernel should fill

    Default:system

    C++ Type:MultiMooseEnum

    Options:nontime, system

    Controllable:No

    Description:The tag for the matrices this Kernel should fill

  • vector_tagsnontimeThe tag for the vectors this Kernel should fill

    Default:nontime

    C++ Type:MultiMooseEnum

    Options:nontime, time

    Controllable:No

    Description:The tag for the vectors this Kernel should fill

Tagging Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Controllable:No

    Description:Determines whether this object is calculated using an implicit or explicit form

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Controllable:No

    Description:The seed for the master random number generator

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

  • ghost_layers1The number of layers of elements to ghost.

    Default:1

    C++ Type:unsigned short

    Controllable:No

    Description:The number of layers of elements to ghost.

  • use_point_neighborsFalseWhether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.

Parallel Ghosting Parameters