- circles_per_sideVector containing the number of bubbles along each side
C++ Type:std::vector<unsigned int>
Unit:(no unit assumed)
Controllable:No
Description:Vector containing the number of bubbles along each side
- invalueThe variable value inside the circle
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The variable value inside the circle
- outvalueThe variable value outside the circle
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The variable value outside the circle
- radiusMean radius value for the circles
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Mean radius value for the circles
- variableThe variable this initial condition is supposed to provide values for.
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The variable this initial condition is supposed to provide values for.
LatticeSmoothCircleIC
buildconstruction:Undocumented Class
The LatticeSmoothCircleIC has not been documented. The content listed below should be used as a starting point for documenting the class, which includes the typical automatic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.
Perturbed square lattice of smooth circles
Overview
Example Input File Syntax
Input Parameters
- 3D_spheresTruein 3D, whether the objects are spheres or columns
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:in 3D, whether the objects are spheres or columns
- avoid_boundsTrueDon't place any bubbles on the simulation cell boundaries
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Don't place any bubbles on the simulation cell boundaries
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- int_width0The interfacial width of the void surface. Defaults to sharp interface
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The interfacial width of the void surface. Defaults to sharp interface
- pos_variation0Variation from central lattice position
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Variation from central lattice position
- profileCOSFunctional dependence for the interface profile
Default:COS
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Functional dependence for the interface profile
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- radius_variation0Plus or minus fraction of random variation in the bubble radius
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Plus or minus fraction of random variation in the bubble radius
- radius_variation_typenoneType of distribution that random circle radii will follow
Default:none
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Type of distribution that random circle radii will follow
- rand_seed2000random seed
Default:2000
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:random seed
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
- zero_gradientFalseSet the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions and overlapping circles.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions and overlapping circles.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the enabled status of the MooseObject.
- ignore_uo_dependencyFalseWhen set to true, a UserObject retrieved by this IC will not be executed before the this IC
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When set to true, a UserObject retrieved by this IC will not be executed before the this IC