ADMultiplePowerLawCreepStressUpdate

This class uses the stress update material in a radial return isotropic power law creep model. This class can be used in conjunction with other creep and plasticity materials for more complex simulations.

Description

Metals can exhibit distinctively different creep behavior depending on the stress level. This object represents creep behavior with various power law expressions (following logic analogous to PowerLawCreepStressUpdate), and selects the right set of parameters for the von Mises stress value seen during the return mapping.

A set of von Mises stress intervals is required in the input. stress_thresholds is a vector of stresses defining a minimum and maximum modeled stress. In between pairs of stress values, in strict order, the corresponding ordered power law parameters must be provided, i.e. coefficient, n_exponent, m_exponent, and activation_energy. This class relies on the implicit integration algorithm in Dunne and Petrinic (2005) pg. 146 - 149.

ADMultiplePowerLawCreepStressUpdate must be run in conjunction with an inelastic strain return mapping stress calculator such as ADComputeMultipleInelasticStress

Input Parameters

activation_energyActivation energy
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Activation energy
coefficientLeading coefficient in power-law equation
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Leading coefficient in power-law equation
m_exponentExponent on time in power-law equation
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Exponent on time in power-law equation
n_exponentExponent on effective stress in power-law equation
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Exponent on effective stress in power-law equation
stress_thresholdsStress intervals to switch creep behavior
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Stress intervals to switch creep behavior

Required Parameters

absolute_tolerance1e-11Absolute convergence tolerance for Newton iteration
Default:1e-11
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Absolute convergence tolerance for Newton iteration
acceptable_multiplier10Factor applied to relative and absolute tolerance for acceptable convergence if iterations are no longer making progress
Default:10
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Factor applied to relative and absolute tolerance for acceptable convergence if iterations are no longer making progress
adaptive_substeppingFalseUse adaptive substepping, where the number of substeps is successively doubled until the return mapping model successfully converges or the maximum number of substeps is reached.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Use adaptive substepping, where the number of substeps is successively doubled until the return mapping model successfully converges or the maximum number of substeps is reached.
automatic_differentiation_return_mappingFalseWhether to use automatic differentiation to compute the derivative.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to use automatic differentiation to compute the derivative.
base_nameOptional parameter that defines a prefix for all material properties related to this stress update model. This allows for multiple models of the same type to be used without naming conflicts.
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Optional parameter that defines a prefix for all material properties related to this stress update model. This allows for multiple models of the same type to be used without naming conflicts.
blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
gas_constant8.3143Universal gas constant
Default:8.3143
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Universal gas constant
max_inelastic_increment0.0001The maximum inelastic strain increment allowed in a time step
Default:0.0001
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The maximum inelastic strain increment allowed in a time step
maximum_number_substeps25The maximum number of substeps allowed before cutting the time step.
Default:25
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The maximum number of substeps allowed before cutting the time step.
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
relative_tolerance1e-08Relative convergence tolerance for Newton iteration
Default:1e-08
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Relative convergence tolerance for Newton iteration
start_time0Start time (if not zero)
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Start time (if not zero)
temperatureCoupled temperature
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Coupled temperature
use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
use_substep_integration_errorFalseIf true, it establishes a substep size that will yield, at most,the creep numerical integration error given by substep_strain_tolerance.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:If true, it establishes a substep size that will yield, at most,the creep numerical integration error given by substep_strain_tolerance.
use_substeppingNONEWhether and how to use substepping
Default:NONE
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:NONE, ERROR_BASED, INCREMENT_BASED
Controllable:No
Description:Whether and how to use substepping

Optional Parameters

apply_strainTrueFlag to apply strain. Used for testing.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Flag to apply strain. Used for testing.
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
effective_inelastic_strain_nameeffective_creep_strainName of the material property that stores the effective inelastic strain
Default:effective_creep_strain
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Name of the material property that stores the effective inelastic strain
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
substep_strain_tolerance0.1Maximum ratio of the initial elastic strain increment at start of the return mapping solve to the maximum inelastic strain allowable in a single substep. Reduce this value to increase the number of substeps
Default:0.1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Maximum ratio of the initial elastic strain increment at start of the return mapping solve to the maximum inelastic strain allowable in a single substep. Reduce this value to increase the number of substeps
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

internal_solve_full_iteration_historyFalseSet true to output full internal Newton iteration history at times determined by `internal_solve_output_on`. If false, only a summary is output.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set true to output full internal Newton iteration history at times determined by `internal_solve_output_on`. If false, only a summary is output.
internal_solve_output_onon_errorWhen to output internal Newton solve information
Default:on_error
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:never, on_error, always
Controllable:No
Description:When to output internal Newton solve information

Debug Parameters

output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object

Outputs Parameters

References

Fionn Dunne and Nik Petrinic. Introduction to Computational Plasticity. Oxford University Press on Demand, 2005.

@book{dunne2005introduction,
    author = "Dunne, Fionn and Petrinic, Nik",
    title = "Introduction to Computational Plasticity",
    year = "2005",
    publisher = "Oxford University Press on Demand"
}