- specific_heatSpecific heat as a function of temperature.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Specific heat as a function of temperature.
- thermal_conductivityThe thermal conductivity tensor values
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:The thermal conductivity tensor values
AnisoHeatConductionMaterial
General-purpose material model for anisotropic heat conduction
Description
The material model AnisoHeatConductionMaterial is used to model a material with anisotropic thermal properties. The thermal conductivity is represented as a rank two tensor: (1)
It is mandatory for the user to supply the parameter thermal_conductivity as a vector with nine element ' '. The thermal conductivity can be set as a function of temperature () by providing the parameters thermal_conductivity_temperature_coefficient_function () and the reference_temperature (). The thermal conductivity as a function of temperature is expressed as:
where is the thermal conductivity based on the user supplied vector. The specific heat capacity can be supplied either as a constant value or as a function using the parameter specific_heat.
It should be noted that in some analyses the thermal conductivity could potentially depend on other variables (e.g. solute concentration). The user should provide off diagonal Jacobian contributions in these analyses.
Example Input Syntax
[./heat]
type = AnisoHeatConductionMaterial
block = 1
specific_heat = 0.116
thermal_conductivity = '10.0 0 0 0 10.0 0 0 0 10.0'
temperature = temperature
[../]
Input Parameters
- base_nameMaterial property base name.
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Material property base name.
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- reference_temperature293Reference temperature for thermal conductivity in Kelvin.
Default:293
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Reference temperature for thermal conductivity in Kelvin.
- temperatureCoupled variable for temperature.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Coupled variable for temperature.
- thermal_conductivity_temperature_coefficient_functionTemperature coefficient for thermal conductivity as a function of temperature.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Temperature coefficient for thermal conductivity as a function of temperature.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object