Line Material Rank Two Scalar Sampler

Compute a scalar property of a RankTwoTensor

Description

The postprocessor LineMaterialRankTwoScalarSampler is used to output common scalar quantities computed from Rank-2 tensors along a user-defined line in the mesh. The postprocessor computes the same set of scalar quantities as the AuxKernel RankTwoScalarAux; for a full list of the available scalar quantities refer to the RankTwoScalarAux page.

The user must supply the start and end points of the line along which the Rank-2 tensor scalar quantity should be tracked. Often this class is used to track stress or strain along an exterior or interior edge of the mesh.

Example Input File Syntax

[./vonmises]
  type = LineMaterialRankTwoScalarSampler
  start = '0.1667 0.4 0.45'
  end = '0.8333 0.6 0.55'
  property = stress
  scalar_type = VonMisesStress
  sort_by = id
[../]

Input Parameters

endThe end of the line
C++ Type:libMesh::Point
Unit:(no unit assumed)
Controllable:No
Description:The end of the line
propertyName of the material property to be output along a line
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Name of the material property to be output along a line
sort_byWhat to sort the samples by
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:x, y, z, id
Controllable:No
Description:What to sort the samples by
startThe beginning of the line
C++ Type:libMesh::Point
Unit:(no unit assumed)
Controllable:No
Description:The beginning of the line

Required Parameters

_auto_broadcastFalse
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
contains_complete_historyFalseSet this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation
direction0 0 1Direction vector
Default:0 0 1
C++ Type:libMesh::Point
Unit:(no unit assumed)
Controllable:No
Description:Direction vector
execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Options:NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
parallel_typeREPLICATEDSet how the data is represented within the VectorPostprocessor (VPP); 'distributed' indicates that data within the VPP is distributed and no auto communication is performed, this setting will result in parallel output within the CSV output; 'replicated' indicates that the data within the VPP is correct on processor 0, the data will automatically be broadcast to all processors unless the '_auto_broadcast' param is set to false within the validParams function.
Default:REPLICATED
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:DISTRIBUTED, REPLICATED
Controllable:No
Description:Set how the data is represented within the VectorPostprocessor (VPP); 'distributed' indicates that data within the VPP is distributed and no auto communication is performed, this setting will result in parallel output within the CSV output; 'replicated' indicates that the data within the VPP is correct on processor 0, the data will automatically be broadcast to all processors unless the '_auto_broadcast' param is set to false within the validParams function.
point10 0 0Start point for axis used to calculate some cylindrical material tensor quantities
Default:0 0 0
C++ Type:libMesh::Point
Unit:(no unit assumed)
Controllable:No
Description:Start point for axis used to calculate some cylindrical material tensor quantities
point20 1 0End point for axis used to calculate some material tensor quantities
Default:0 1 0
C++ Type:libMesh::Point
Unit:(no unit assumed)
Controllable:No
Description:End point for axis used to calculate some material tensor quantities
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
scalar_typeA scalar to output
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:VonMisesStress, EffectiveStrain, Hydrostatic, L2norm, MaxPrincipal, MidPrincipal, MinPrincipal, VolumetricStrain, FirstInvariant, SecondInvariant, ThirdInvariant, AxialStress, HoopStress, RadialStress, TriaxialityStress, Direction, MaxShear, StressIntensity
Controllable:No
Description:A scalar to output
use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Optional Parameters

allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
outputsVector of output names where you would like to restrict the output of variables(s) associated with this object
C++ Type:std::vector<OutputName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

(moose/modules/solid_mechanics/test/tests/line_material_rank_two_sampler/rank_two_scalar_sampler.i)

[GlobalParams]
  displacements = 'x_disp y_disp z_disp'
[]

[Mesh]
  type = GeneratedMesh
  dim = 3
  nx = 3
  ny = 3
  nz = 3
  elem_type = HEX
[]

[Functions]
  [./rampConstant]
    type = PiecewiseLinear
    x = '0. 1.'
    y = '0. 1.'
    scale_factor = 1e-6
  [../]
[]

[Variables]
  [./x_disp]
    order = FIRST
    family = LAGRANGE
  [../]
  [./y_disp]
    order = FIRST
    family = LAGRANGE
  [../]
  [./z_disp]
    order = FIRST
    family = LAGRANGE
  [../]
[]

[AuxVariables]
  [./vonmises]
    order = CONSTANT
    family = MONOMIAL
 [../]
 [./stress_xx]
    order = CONSTANT
    family = MONOMIAL
 [../]
[]

[AuxKernels]
  [./vonmises]
    type = RankTwoScalarAux
    rank_two_tensor = stress
    variable = vonmises
    scalar_type = VonMisesStress
  [../]
[]

[VectorPostprocessors]
  [./vonmises]
    type = LineMaterialRankTwoScalarSampler
    start = '0.1667 0.4 0.45'
    end   = '0.8333 0.6 0.55'
    property = stress
    scalar_type = VonMisesStress
    sort_by = id
  [../]
[]

[Kernels]
  [SolidMechanics]
    use_displaced_mesh = true
  [../]
[]

[BCs]
  [./front]
    type = FunctionDirichletBC
    variable = z_disp
    boundary = 5
    function = rampConstant
  [../]
  [./back_x]
    type = DirichletBC
    variable = x_disp
    boundary = 0
    value = 0.0
  [../]
  [./back_y]
    type = DirichletBC
    variable = y_disp
    boundary = 0
    value = 0.0
  [../]
  [./back_z]
    type = DirichletBC
    variable = z_disp
    boundary = 0
    value = 0.0
  [../]
[]

[Materials]
  [./elast_tensor]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 1e6
    poissons_ratio = .3
  [../]
  [./strain]
    type = ComputeSmallStrain
  [../]
  [./stress]
    type = ComputeLinearElasticStress
  [../]
[]

[Executioner]
  type = Transient

  solve_type = PJFNK

  l_max_its = 100

  start_time = 0.0
  num_steps = 99999
  end_time = 1.0
  dt = 0.1
[]

[Outputs]
  file_base = rank_two_scalar_sampler_out
  csv = true
[]